DT SWISS Front Wheel 29 "XR 1501 Spline One 22.5mm | 15x110mm Predictive Steering
The DT Swiss Spline One wheels are built from the best ingredients of the Swiss traditional manufactory. The new rim with 22.5 millimeters inside has become 2.5 millimeters wider, compared to the previous version. This results in more tire volume with the same tire width and the wheels offer more comfort and traction on the trail. The asymmetric rim design enables load-optimized spoke angles and thus increases the wheel stiffness. With proven inner hub life and high Einspeichqualität the Spline wheelsets in terms of durability and robustness are beyond any doubt. With its low weight, the XR 1501 can be accelerated slightly and is thus predestined for cross country use. The wheelset is supplied with extensive accessories (see scope of delivery).
All rims of the Spline wheelsets are equipped with a tubeless compatible profile. Thus, only Tubelesstape glued and the tubeless valves supplied are used and the spline wheelset is ready for tubeless use. The rims are connected by a special welding process, which is the best and most durable connection of a rim. Subsequent milling guarantees a technically and optically clean rim joint.
The spline wheelsets are built exclusively with straightpull spokes. This ensures a very high stiffness in the impeller and by eliminating the delicate spoke arch for a very high durability. In addition, the spokes are double butted with a tapered middle section. This reduces the overall weight of the wheelset and increases the durability of the spokes. This reduces the overall weight of the wheelset and increases the durability of the spokes.
PHR nipple system
It stands for Pro Head Reinforcement System, where the nipple and rim form a kind of ball joint. This provides a larger surface area between the nipple and the rim, which makes the nipple easier to align. Thus, the spokes are always at the correct angle to the rim and the forces can be transmitted better. The DT Squorx nipple have on the underside a Torx mount , which ensures a better tool holder for a more precise centering. On the outside, the Squorx nipples can still be retightened with a standard standard nipple wrench.
intended use : XC Race, XC Allround, All Mountain, Trail
Material rim: aluminum
Impeller size: 29 "
Rim type: clincher (suitable for folding and clincher)
Tubeless capable: yes
Outer width rims: 26 mm
Inner width rims: 22.5 mm
axle type front wheel: 15x 110 mm Predictive Steering
Disc holder: 6-hole (IS2000)
Spokes: DT Competition | Straightpull
Spacing: crossed 3 times | 28 holes
maximum recommended rider weight: 110 kg (driver including clothing)
Weight: 748g (manufacturer)
Scope of delivery: front wheel, tubeless valve, rim tape
Note: Illustration similar!
You can find more information here .