DT SWISS Front Wheel 29 "HXC 1200 Spline Boost Hybrid | E-Bike With its hybrid wheel sets, DT-Swiss is launching its first series of impellers, specially developed for use with eMTBs. Not only the system weight at eMTBs is higher and leads to higher loads for the wheels, also many trails and rough passages can be driven with significantly higher speeds. In addition to this, the drive system generates higher driving torques which are required to be placed on the ground and require stiffer wheels. The engineers at DT-Swiss have taken this requirement into account and optimized all components of their proven Spline wheel sets for use with eMTBs.
The HXC 1200 Spline wheels represent the top of the DT-Swiss hybrid wheels. By installing an ultra-solid full carbon rim, the weight compared to the aluminum variants has been significantly reduced. With 30 millimeters of mouth width, the rim plus tires up to 3.5 inches, even at low air pressures, provides a good support. With a clearance of up to 120 kilos of system weight (driver, clothing, wheel), the HXC 1200 wheels offer enough reserves for heavy riders on rough trails.
Hybrid front hub
The hybrid hub has an oversized housing, a heavy duty axle and extra reinforced spoke mountings. Over-dimensioned bearings additionally ensure high robustness and durability. Despite these adjustments, the hybrid hub adds a very small extra weight compared to a standard MTB hub. The spline hub flanges for Straigthpull spokes also make the hub optically an eyecatcher.
In order to transfer the higher drive forces to the rims, DT-Swiss developed special oversized hybrid spokes. They consist of the same high-performance steel alloy as all the tried and tested DT Swiss spokes. However, the Straightpull hybrid spokes are equipped with reinforced and oversized fuel heads, which together with the DT Pro Lock Squorx nipples ensure that every watt on the rim arrives.
Due to the system's increased overall weight, the rims of e-bikes must be able to push away more than on conventional MTBs. At first glance, the hybrid rims differ from the standard DT Swiss enduro rims. So they have the same Tubelessready rim profile with load-optimized cross-sections. However, in the case of the hybrid rims, material strength and strength were increased at the critical points in order to permanently withstand the higher loads.
intended use : E-Bike, Tour, All Mountain, Trail
Wheel Size: 29 "(ETRTO: 622 x 30 mm)
Type of rim: clincher (wire and folding)
Brake type: only for disc brake
Brake disc mount: 6-hole (IS2000)
Material Rim: Carbon
Material hub: aluminum
Internal width: 30 mm
External width: 36 mm
Wheel height: 30 mm
Number of holes: 28 holes
axle type : 15x110 mm Plug-in axle (BOOST / Outboard)
bearing : 2x oversized industrial storage
Seal: labyrinth rubber seals
Spokes: 28x DT Swiss hybrid spokes, straightpull
Tubeless capable: yes
Recommended tire width: 47-89 mm
Maximum driver weight: 120 Kg (driver, bike, clothing and possibly luggage)
Color: black, white logos
Weight: 794g (manufacturer's specification)
Scope of delivery: front wheel, tubeless tape, tubeless valve
EAN: 7613052280028 | MPN: WHXC120BFIXCA06083