DT SWISS front wheel 27.5 "| 650B HXC 1200 Spline Boost Hybrid | E-Bike
With the hybrid wheel sets, DT-Swiss brings the first wheel series onto the market that was specially developed for use on eMTBs. Not only the system weight of eMTBs is higher and leads to higher loads on the wheels, many trails and rough passages can also be ridden at significantly higher speeds. In addition, the electric drive creates higher drive torques that need to be brought to the ground and require stiffer wheels. The engineers at DT-Swiss have taken this requirement profile into account and optimized all components of their proven Spline wheel sets for use on eMTBs.
The HXC 1200 Spline wheels are the top of the DT-Swiss Hybrid wheels. By installing an ultra-stiff full carbon rim, the weight has been significantly reduced compared to the aluminum variants. With an internal width of 30 millimeters, the Rim Plus gives tires up to 3.5 inches good support, even at low air pressures. With a system weight rating of up to 120 kilograms (rider, clothing, bike), the HXC 1200 wheels offer enough reserves even for strong riders on rough trails.
Hybrid front hub
The hybrid hub has an oversized housing, a heavy-duty axle and extra reinforced spoke mounts. Oversized bearings also ensure a high level of robustness and durability. Despite these adjustments, the hybrid hub only adds very little weight compared to a standard MTB hub. The spline hub flanges for straight pull spokes also make the hub an eye-catcher.
In order to be able to transfer the higher drive forces to the rims, DT-Swiss developed special oversized hybrid spokes. They consist of the same high-performance steel alloy as all proven DT Swiss spokes. However, the Straightpull hybrid spokes are equipped with reinforced and oversized spoke heads which, together with the DT Pro Lock Squorx nipples, ensure that every watt reaches the rim.
Due to the system-related higher total weight, the rims of e-bikes must be able to withstand significantly more than on conventional MTBs. At first glance, the hybrid rims do not differ from the standard DT-Swiss enduro rims. They have the same tubeless ready rim profile with load-optimized cross-sections. In the case of the hybrid rims, however, material thickness and strength have been increased at critical points in order to withstand the higher loads permanently.
intended use : E-Bike, Tour, All Mountain, Trail
Impeller size: 27.5 "(ETRTO: 584 x 30 mm)
Rim type: Clincher (wire and folding tires)
Brake type: only for disc brake
Brake disc mount: 6-hole (IS2000)
Material rim: carbon
Material hub: aluminum
Inside width: 30
External width: 36
Rim height: 30 mm
Number of holes: 28 holes
axle type : 15x110 mm plug axis (BOOST / outboard)
bearing : 2x oversized industrial warehouse
Seal: labyrinth rubber seals
Spokes: 28x DT Swiss Hybrid spokes, straight pull
tubeless capable: yes
Recommended tire width: 1.85 "-3.5" (47-89 mm)
Maximum driver weight: 120 kg (driver, bike, clothing and possibly luggage)
Color: black, white logos
Weight according to the manufacturer: 740g
Weight weighed by yourself:
Scope of delivery: front wheel, tubeless tape, tubeless valve