DARIMO CARBON stem IX4 UD matt | 6 °
A small tip in advance: Please always mount this stem properly. There is a risk that he might float because of its low weight. This is really phenomenal with 74 g at a length of 100 mm. Anyone who wants to build an ultralight bike should consider the Darimo stem.
But how do the Spaniards manage to produce such a flyweight? The clever heads of Valencia have done a lot of work and save material where they can. Of course, they also pay attention to safety and rigidity. For the latter, especially the shaping plays an important role. Round stems have a high torsional stiffness, while more square cross sections are very stable in the vertical direction. As a result, a combination of both forms was selected, which combines the respective advantages. He also has a striking look and is an eye-catcher on your bike.
The removable front panel is held by 4 Titanium screws. This also allows easy installation of Aero road handlebars.
Note: The Darimo stem is a high-end product and requires careful work during cultivation. All torques and rider weights specified by the manufacturer must be strictly adhered to. This increases the life of the stem and serves your safety.
intended use : Road bike or mountain bike (cross country, marathon)
Material stem: UD carbon
Material screws: titanium
Handlebar clamp Ø: 31.8 mm
Steerer diameter: 1 1/8 "
Lengths: 80, 90, 100, 110, 120 or 130mm
Angle: +/- 6 °
Clamp height steerer: n / a
Clamp width handlebar: n / a
Tool holder: n / a
Max. permissible torque: kA
Weight restriction: not specified
Finish: UD carbon matt
Color: Black; Decals: black
Weight according to manufacturer: 74g (100 mm)
Weight weighed: 76g (100mm)
Scope of supply: 1x DARIMO stem IX4 UD matt | 6 °
Note: The stem is shown in glossy version 3K. It will of course be delivered in UD matt.