CONTEC press-in tool for bottom bracket TFM-300 | BB-IT-30-86-90
Is the bottom bracket due for replacement? With the CONTEC TFM-300 "IT-BB-30-86-90" press-in tool, all press-fit bottom brackets of the types BB30, BB86 and BB90 can be pressed in perfectly and without tilting. The bearings are placed on the axle of the tool, which is pushed through the bottom bracket shell. By tightening the nut, both halves of the tool press your bottom bracket well into the frame.
The CONTEC press-in tool guarantees professional assembly without damaging the frame or bearing.
NOTE: The tool is not suitable for installing SRAM DUB bottom brackets with a diameter of 28.88 mm.
Technical specifications:
Material: steel, aluminum
Compatibility frames: BB86, BB92, BB90, BB30, PF30, BB386EVO
Bottom bracket compatibility: SRAM GXP (22/24 mm) Shimano, Raceface, Rotor (24 mm) BB30, PF30 (30 mm)
Tool holder: 8 mm Allen key, 17 mm ring or open-end wrench
Weight according to manufacturer: -
Weight weighed: 302g
Scope of delivery: 1x CONTEC press-in tool for bottom bracket TFM-300 | BB-IT-30-86-90