header image

    CHRIS KING Hub rear MTB ISO Singlespeed Disc Fun Bolts Ceramic

    Item no.:

    Product weight:406g
    Chris King
    655,50 € UVP: 849,00 €
    You save 22,79 %, that is 193,50 €
    including 19% VAT. , no shipping costs
    • 1 week
    Hole Number

    Article details

      CHRIS KING hub rear MTB ISO Singlespeed Disc Fun Bolts Ceramic

      Chris King describes the freewheeling sound of his boss with Angry Bee sound, the sound of an angry bee. The 72 teeth of the toothed disc freewheel cause freewheel the low hum and give the boss as their characteristic sound. The extremely fine gradation of the freewheel eliminates the free travel of the pedal and brings a little more control over the wheel. Particularly in technically demanding and blocked intended use, this plays a role.

      By an improved manufacturing process of the Nabenflanschdurchmesser was increased, the spoke holes are characterized further apart and the length of the spokes is shorter. A lighter and more rigid wheel is the result. Also bear the multiple sealed bearings, which are manufactured by Chris King in Portland, Oregon itself, in order to increase the service life.
      A highlight is the 5-year warranty. This shows the confidence of Chris King in its products.

      This Chris King rear hub is compatible with the ISO standard disc (6-hole Bremscheibenaufnahme). The precisely machined and anodized in bright colors surfaces are designed for typical Chris King in extremely high quality.

      In the Ceramic design the bearing balls have ceramic. The ceramic is significantly harder than conventional steel balls and at the same time much smoother. Bearing life extended if gleichzeitigiger reduce friction in the bearings.

      Technical specifications:

      Axle system: Quick release | FunBolts
      axle: aluminum, one piece
      Hub body: aluminum
      Disc mount: 6-hole
      Mounting width: 135 mm
      bearing: Ceramic bearings
      Hole number: 28 or 32
      Freewheel: Chris King Single Speed
      Freewheel body: aluminum
      Freewheel mechanism: toothed disc freewheel with 72 interventions
      Color: black, blue, red, pewter, pink, green, mango

      flange geometry:

      Speichenlochdurchmesesser: 2.5 mm
      Spoke bolt circle diameter: 57.4 mm
      Center-right flange: 32.3 mm
      Center-left flange: 31.0 mm
      Flange distance: 63.1 mm

      Weight: 406 g (manufacturer information, complete)
      incl. pinion (16 g), spacers (6 g), lock ring (4 g) and Fun Bolts (42 g)

      Delivery: Chris King ISO hub, stainless steel pinion (18 teeth), spacers, lock ring, 2x FunBolts

      Note: The hubs are allowed for 2-way intersection or more. The last picture shows the possible colors using the example of R45-front wheel hub.

      Product weight:406g