header image

    CHRIS KING Hub rear MTB ISO Disc Quickrelease Freehub Body Shimano | SRAM

    Item no.:
    12086

    Product weight:335g
    Manufacturer:
    Chris King
    477,50 € UVP: 619,00 €
    You save 22,86 %, that is 141,50 €
    including 19% VAT. , no shipping costs
    • available from stock
    Color
    drilling hole

    Article details

      CHRISKING hub rear MTB ISO disc for quick releases Freilauf Shimano | SRAM

      CHRIS KING describes the freewheeling noise of his hubs with "Angry Bee Sound", the sound of an angry bee. The 72 teeth of the toothed disc freewheel cause the deep hum to freeze and give the hubs their characteristic sound. The extremely fine gradation of the freewheel eliminates the idle path at the pedal and thus brings more control over the wheel. This is particularly important in technically challenging and interlocked terrain.

      By an improved manufacturing process, the hub flange diameter has been increased, the spoke holes are further apart and the length of the spokes becomes shorter. A lighter and stiffer wheel is the result. Likewise, the multi-sealed industrial bearings produced by CHRISKING in Portland, Oregon, contribute to an increase in service life.
      One highlight is the 5 year warranty. This shows the confidence of Chris King in his products.

      This CHRISKING ISO DISC rear hub can be fitted with the appropriate axle at any time to the hub standards 10 x 135 mm Thru Bolt | TA10, 12 X 135 mm TA, 12 x 142 mm X-12 | E-Thru | Maxle142 mm can be retrofitted. It is compatible with the ISO disc standard (6-hole brake disc mount). The precisely milled and anodised surfaces in strong colors are designed for Chris King in extremely high quality.


      Technical specifications:

      intended use : MTB, Downhill, All-Mountain
      Material: aluminum, stainless steel
      Mounting width: 135 mm
      axle type : 5x135 mm quick release
      Number of holes: 28, 32, 36 holes (not all colors / hole combinations are available)
      Brake disc mount: 6-hole (ISO standard)
      Freewheel Compatibility: 8-, 9-, 10-, 11-speed MTB Shimano | SRAM
      Freewheel type: stainless steel sprocket, 72 ratchets
      bearing : 2x stainless steel, precision industrial bearing
      Seal: labyrinth rubber seals
      Memory Type: Standard Spokes (J-Bend)
      Memory voltage: 1200N
      Maximum driver weight: without weight restriction
      Color: black, orange Mango, blue | Navy, red, silver, turquoise Turquoise, matte black Matte Jet, matt gray Matte Slate

      Weight: 335g


      Scope of delivery: 1x CHRISKING ISO Disc rear wheel hub

      quick start Guide

      CHRIS KING ISO Disc EN
      Product weight:335g
      Top