header image

    CHRIS KING Hub rear MTB ISO Disc Ceramic for Quickrelease Freehub Body Shimano | SRAM

    Item no.:

    Product weight:330g
    Chris King
    577,50 € UVP: 749,00 €
    You save 22,9 %, that is 171,50 €
    including 19% VAT. , no shipping costs
    • 1 week
    Hole Number

    Article details

      CHRIS KING hub rear MTB ISO Disc Ceramic for quick release Freewheel Shimano | SRAM

      Chris King describes the freewheeling sound of his boss with "Angry Bee Sound", the sound of an angry bee. The 72 teeth of the toothed disc freewheel cause freewheel the low hum and give the boss as their characteristic sound. The extremely fine gradation of the freewheel eliminates the free travel of the pedal and brings a little more control over the wheel. Particularly in technically demanding and blocked intended use, this plays a role.

      By an improved manufacturing process of the Nabenflanschdurchmesser was increased, the spoke holes are characterized further apart and the length of the spokes becomes shorter. A lighter and more rigid wheel is the result. Also bear the multiple sealed bearings, which are manufactured by Chris King in Portland, Oregon itself, in order to increase the service life.
      A highlight is the 5-year warranty. This shows the confidence of Chris King in its products.

      This Chris King rear hub can with the corresponding axle at any time on quick release or the 10 x 135 mm thru bolt | TA10, 12 X 135 mm TA, 12 x 142 mm X-12 | E-Thru | Maxle142 mm Steckachsstandards be retrofitted. It is compatible with the ISO standard disc (6-hole Bremscheibenaufnahme). The precisely machined and anodized in bright colors surfaces are designed for typical Chris King in extremely high quality.

      In the Ceramic design the bearing balls have ceramic. The ceramic is significantly harder than conventional steel balls and at the same time much smoother. Bearing life extended if gleichzeitigiger reduce friction in bearings

      Technical specifications:

      Axle system: quick release, 135 x 10 mm
      axle: aluminum, one piece
      Hub body: aluminum
      Disc mount: 6-hole
      Mounting width: 135 mm
      bearing: Ceramic bearings
      Number of holes: 28 | 32 holes
      Freewheel: 8/9/10-speed Shimano / SRAM
      Freewheel body: aluminum
      Freewheel mechanism: toothed disc freewheel with 72 interventions
      Color: black, silver, blue, red, titanium | path, pink, green, gold, orange | mango

      Weight: 330 g (manufacturer)

      flange geometry:

      Speichenlochdurchmesesser: 2.5 mm
      Spoke bolt circle diameter: 57.4 mm
      Center-right flange: 22.2 mm
      Center-left flange: 31.6 mm
      Flange: 54 mm

      Note: The hubs are allowed for 2-way intersection or more.

      Product weight:330g

      Other customers have also bought the following items