CHRISKING hub rear MTB ISO DH Disc 12x157 mm Freilauf Shimano | SRAM
CHRIS KING describes the freewheeling noise of his hubs with "Angry Bee Sound", the sound of an angry bee. The 72 teeth of the toothed disc freewheel cause the deep hum to freeze and give the hubs their characteristic sound. The extremely fine grading of the freewheel eliminates the idle path at the pedal and thus brings more control over the wheel. This is particularly important in technically challenging and interlocked terrain.
By an improved manufacturing process, the hub flange diameter has been increased, the spoke holes are further apart and the length of the spokes becomes shorter. A lighter and stiffer wheel is the result. Likewise, the multiple sealed industrial bearings manufactured by Chris King in Portland, Oregon, contribute to the increase in service life.
One highlight is the 5 year warranty. This shows the confidence of Chris King in his products.
In contrast to the CHRIS KING ISO Disc, the flange spacing is widened by approx. 10 mm, so it is possible to build a stiffer impeller because the spoke angle is smaller. In addition, the hub is only available with hole numbers of 32 and 36 holes.
The CHRISKING ISO DH DISC rear wheel hub is compatible with the ISO disc standard (6-hole brake disc mount). The precisely milled and anodised surfaces in strong colors are typical for CHRIS KING in extremely high quality.
intended use : Enduro, Downhill, All-Mountain
Material: aluminum, stainless steel
Mounting width: 157 mm
axle type : 12x157 mm quick release
Number of holes: 32, 36 holes
Brake disc mount: 6-hole (ISO standard)
Freilauf Compatibility: 8-, 9-, 10-, 11-speed Shimano / SRAM
Freewheel type: stainless steel sprocket, 72 ratchets
bearing : 2x stainless steel, precision industrial bearing
Seal: labyrinth rubber seals
Memory Type: Standard Spokes (J-Bend)
Memory voltage: 1200N
Maximum driver weight: without weight restriction
Color: black, orange Mango, blue | Navy, red, silver, turquoise Turquoise
quick start Guide
Scope of delivery: 1x CHRISKING ISO DH Disc rear wheel hub
CHRIS KING ISO Disc EN