header image

    CHRIS KING Hub rear MTB ISO DH Disc for 12x150 mm Thru Axle | Freehub Body Shimano | SRAM

    Item no.:
    27684

    Product weight:338g
    Manufacturer:
    Chris King
    507,50 € UVP: 659,00 €
    You save 22,99 %, that is 151,50 €
    including 19% VAT. , no shipping costs
    • 1 week
    Color
    Hole Number

    Article details

      CHRISKING Hub rear MTB ISO DH Disc 12x150 Freilauf Shimano | SRAM

      CHRIS KING describes the freewheeling noise of his hubs with "Angry Bee Sound", the sound of an angry bee. The 72 teeth of the toothed disc freewheel cause the deep hum to freeze and give the hubs their characteristic sound. The extremely fine grading of the freewheel eliminates the idle path at the pedal and thus brings more control over the wheel. This is particularly important in technically challenging and interlocked terrain.

      By an improved manufacturing process, the hub flange diameter has been increased, the spoke holes are further apart and the length of the spokes becomes shorter. A lighter and stiffer wheel is the result. Likewise, the multiple sealed industrial bearings manufactured by Chris King in Portland, Oregon, contribute to the increase in service life.
      One highlight is the 5 year warranty. This shows the confidence of Chris King in his products.

      In contrast to the CHRIS KING ISO Disc, the flange spacing is widened by approx. 10 mm, so it is possible to build a stiffer impeller because the spoke angle is smaller. In addition, the hub is only available with hole numbers of 32 and 36 holes.

      The CHRISKING ISO DH DISC rear wheel hub is compatible with the ISO disc standard (6-hole brake disc mount). The precisely milled and anodised surfaces in strong colors are typical for CHRIS KING in extremely high quality.

      Technical specifications:

      intended use : Enduro, Downhill, All-Mountain
      Material: aluminum, stainless steel
      Mounting width: 150 mm
      axle type : 12x150 mm quick release
      Number of holes: 32, 36 holes
      Brake disc mount: 6-hole (ISO standard)
      Freilauf Compatibility: 8-, 9-, 10-, 11-speed Shimano / SRAM
      Freewheel type: stainless steel sprocket, 72 ratchets
      bearing : 2x stainless steel, precision industrial bearing
      Seal: labyrinth rubber seals
      Memory Type: Standard Spokes (J-Bend)
      Memory voltage: 1200N
      Maximum driver weight: without weight restriction
      Color: black, orange Mango, blue | Navy, red, silver, turquoise Turquoise

      Weight: 338g (manufacturer's specification)


      Scope of delivery: 1x CHRISKING ISO DH Disc rear wheel hub

      quick start Guide

      CHRIS KING ISO Disc EN

      Product weight:338g
      Top