CHRIS KING Hub rear MTB ISO DH Disc Ceramic for 12x150 mm Thru Axle | Freehub Body XD (XX1)
CHRIS KING hub rear MTB DH ISO Disc Ceramic for 12x150 mm thru-axle | Freewheel XD (XX1)
Chris King describes the freewheeling sound of his boss with "Angry Bee Sound", the sound of an angry bee. The 72 teeth of the toothed disc freewheel cause freewheel the low hum and give the boss as their characteristic sound. The extremely fine gradation of the freewheel eliminates the free travel of the pedal and brings a little more control over the wheel. Particularly in technically demanding and blocked intended use, this plays a role.
By an improved manufacturing process of the Nabenflanschdurchmesser was increased, the spoke holes are characterized further apart and the length of the spokes is shorter. A lighter and more rigid wheel is the result. Also bear the multiple sealed bearings, which are manufactured by Chris King in Portland, Oregon itself, in order to increase the service life. A highlight is the 5-year warranty. This shows the confidence of Chris King in its products.
This Chris King rear hub is compatible with the ISO standard disc (6-hole Bremscheibenaufnahme). The precisely machined and anodized in bright colors surfaces are designed for typical Chris King in extremely high quality.
In the Ceramic design the bearing balls have ceramic. The ceramic is significantly harder than conventional steel balls and at the same time much smoother. Bearing life extended if gleichzeitigiger reduce friction in bearings
Axle system: 12 x 150 mm X-12 | E-Thru | Maxle150 mm axle: aluminum, one piece Hub body: aluminum Disc mount: 6-hole Mounting width: 150 mm bearing: Ceramic bearings Number of holes: 32 | 36 holes Freewheel: 11-speed SRAM XD (XX1, X01, X1) Freewheel body: steel Freewheel mechanism: toothed disc freewheel with 72 interventions Color: black, blue, red, titanium | path, pink, green, orange | mango
Weight: 333 g (manufacturer)
Speichenlochdurchmesesser: 2.5 mm Spoke bolt circle diameter: 57.4 mm Center-right flange: 28.5 mm Center-left flange: 39.6 mm Flange distance: 68.1 mm
Note: The hubs are allowed for 2-way intersection or more.