CHRIS KING Front MTB ISO Disc SD Quick Release Weight: 174g
Chris King Hubs hangs on a certain myth. They have been on the market almost unchanged for years and do not belong to the old iron. Thanks to constant technology, further development and independent optics, they have developed into a true cult object.
The ISO disc hubs have an enlarged diameter and a one-piece aluminum axle , which makes them significantly stiffer. The result is a higher steering precision, since the hub hardly deforms during driving, even under high stress.
By an improved manufacturing process, the hub flange diameter has been increased, the spoke holes are further apart and the length of the spokes becomes shorter. A lighter and stiffer wheel is the result. Likewise, the multi-sealed industrial bearings produced by Chris King in Portland, Oregon, help to increase the service life.
One highlight is the 5 year warranty. This shows the confidence of Chris King in his products.
The front wheel hub in the Small Diameter (SD) version can be retrofitted with the corresponding axle at any time to the 15 mm plug axle standard. It is compatible with the ISO disc standard (6-hole brake disc mount). The precisely milled and anodised surfaces in strong colors are designed for Chris King in extremely high quality.
Note: The hubs are approved for double crossing or more.
intended use : Cross Country, Marathon, All Mountain, Enduro
Material: aluminum, stainless steel
Mounting width: 100 mm
axle type : 5x100 mm quick release
Number of holes: 24, 28, 32, 36 holes (not all colors / hole combinations are available)
Brake disc mount: 6-hole (IS2000)
bearing : 2x stainless steel, precision industrial bearing
Seal: labyrinth rubber seals
Memory Type: Standard Spokes (J-Bend)
Memory voltage: 1200N
Maximum driver weight: without weight restriction
Color: black, orange Mango, blue | Navy, red, silver, turquoise Turquoise, matte black Matte Jet, matt gray Matte Slate
Scope of delivery: 1 x CHRISKING MTB ISO Disc SD hub
quick start Guide
Chris King ISO Disc EN