shipping country:
    header image

    CHRIS KING Hub front MTB ISO Disc CeramicSD Quickrelease

    Item no.:

    Product weight:172g
    Chris King
    342,50 €
    Finance from 21 EUR / Monat
    UVP: 429,99 €
    You save 20,35 %, that is 87,49 €
    including 19% VAT. excl. Shipping costs / shipping time info
    • 1 week
    Hole Number

    Article details

      CHRIS KING hub front MTB ISO Disc SD quick release

      Chris King hubs depends on a certain myth. They are almost unchanged on the market for years and yet they are not old-fashioned. Thanks to consistent technology, further development and independent appearance, they have become a cult object.
      The ISO Disc hubs have an enlarged diameter and a one-piece aluminum axle , making them much stiffer. The result is a higher steering precision, since the hub hardly deforms when driving, even at high stress.

      Through an improved manufacturing process, the hub flange diameter has been increased, the spoke holes are further apart and the length of the spokes becomes shorter. A lighter and stiffer wheel is the result. Likewise, the multi-sealed industrial bearings, manufactured by Chris King of Portland, Oregon, add to the longevity.
      A highlight is the 5-year warranty. This shows Chris King's trust in his products.

      The front hub in the Small Diameter (SD) version can be retrofitted with the corresponding axle at any time to the 15 mm thru-axle standard. It is compatible with the ISO-Disc standard (6-hole disc holder). The precisely milled and brightly colored anodised surfaces are typically executed in extremely high quality for Chris King.

      In the ceramic version, the ball bearings have ceramic balls. The ceramic is significantly harder than conventional steel balls and at the same time much smoother. The life of the bearings is extended while reducing friction in the bearing!

      Note: The hubs are approved for 2-way intersection or more.

      Technical specifications:

      intended use : Cross Country, Marathon, All Mountain, Enduro
      Material: aluminum, stainless steel
      Installation width: 100 mm
      axle type : 5x100 mm quick release
      Number of holes: 24, 28, 32, 36 holes (not all colors / hole combinations are available)
      Disc holder: 6-hole (IS2000)
      bearing : 2x ceramic, precision industrial bearing
      Seal: labyrinth rubber seals
      Spoke type: standard spokes (J-bend)
      Spoke tension: 1200N
      maximum rider weight: without weight restriction
      Color: black, orange | Mango, blue | Navy, red, silver, turquoise | Turquoise, matt black | Matte Jet, matte gray | Mat slate

      Weight: 169g (manufacturer)

      Scope of supply: 1 x CHRIS KING MTB ISO Disc SD hub

      quick start Guide

      Chris King R45 / R45 Disc | EN