CERAMICSPEED OSPW X System for SRAM Force 1/Rival 1 Type 3
CERAMICSPEED OSPW X Rear Derailleur Cage System SRAM Force 1 / Rival 1 | Type 3
The fastest pulley system is now also available for your cross, gravel and road bike with SRAM Force 1 or Rival 1 with Type 3 rear derailleur.
The Oversized Pulley Wheel System X (OSPW X) from CERAMICSPEED is the logical consequence of friction minimization. Due to the large rear derailleur rollers with 14 teeth at the top and 18 teeth at the bottom, the looping radii of the chain are clearly minimized, which results in less friction. In addition, the larger derailleur rollers offer a longer service life than other commercially available systems. Thanks to the narrow-wide profile of your teeth, your chain stays exactly where it belongs in every situation.
Technically, the OSPW X system is equipped with high-performance bearings and special third-grade silicon nitride ceramic ball (best-achieved grade for ceramic bearings). The ball bearing cage is made of reinforced polyamide, with a hardened steel raceway and polished groove. The CERAMICSPEED bearing balls are 15% harder, 100% smoother and 99% stronger than standard ceramic balls. CERAMICSPEED bearings are considered the best ceramic bearings worldwide. The bearing cage is made of carbon fibers that have been reinforced with polyamide, so that the forces can be better distributed and absorbed and your derailleur works perfectly even in the most adverse conditions.
Maintenance: It is important to maintain the performance and longevity to lubricate the bearings carefully. Simply apply oil to the seals of the bearings so that the oil can penetrate into the bearing. Do this each time when lubricating the chain, or after washing the wheel, or after driving under wet and muddy conditions.
IMPORTANT: When traveling, please remember to dismantle the complete rear derailleur, as few bicycle bags provide sufficient space for the OSPW system. The OSPW X system only fits with Type 3 rear derailleurs! The Cagelock is only usable if it is in the 8 o'clock position!
intended use : CX, Gravel and road bike (1-speed) Material cage: carbon, polyamide Material bearings: polyamide, steel, ceramic Material rolls: aluminum Bearing: ceramics type 607 Number of teeth above: 14, narrow-wide Number of teeth above: 18, narrow-wide Compatibility: SRAM Force 1 and Rival 1 with Type 3 clutch largest pinion: max. 42 teeth Color: Black
Delivery: 1x CERAMICSPEED OSPW X Rear Derailleur Cage System SRAM Force 1 / Rival 1 | Type 3 1x 15 ml of oil 1x sticker sheet
EAN: 5711050052578 | MPN: 106351
Other customers have also bought the following items