Description
CERAMICSPEED bottom bracket PF30 Pressfit Coated | SRAM DUB Road
The bottom brackets from the Danish company CeramicSpeed represent the absolute high-end solution for all racing drivers who place the highest value on lowest friction with best power transmission. This makes you faster and more effective with the same effort.
The CeramicSpeed-SpeedBalls balls are 15% harder than those of the competition and can absorb significantly more forces. They also have an incredibly smooth surface, thereby reducing rolling resistance to a minimum. With all these improvements, the lifespan could be increased 6 times.
Compared to the already high-quality standard bearings from CeramicSpeed, the "coated" version has a wafer-thin protective layer on the bearing rings. The latter become even tougher, have a further 60% longer life cycle and an even lower rolling resistance.
CeramicSpeed uses only the best material and the latest technologies in its manufacture in order to always achieve the highest possible quality. All products are handmade in Denmark. Manual assembly eliminates manufacturing tolerances and guarantees a 100% fit. So that you really only install the best on your bike.
With this bottom bracket you can install a crank with SRAM DUB shaft in a racing bike frame with PF30 Pressfit bottom bracket shell.
Technical specifications:
intended use : Road, Cyclocross
Bearing shell material: aluminum
Material bearing: ceramic (balls), steel (inner ring and outer ring)
Bottom bracket type: PF30 Pressfit
Bottom bracket housing width: 68 mm
Bottom bracket housing Ø: 46 mm
Crank shaft diameter: 28.99 mm
Compatibility crank: SRAM DUB Road crank
Bearing: stainless steel coated
Tool holder: press-in tool
Color: black or red
Weight according to the manufacturer: not specified
Weight weighed: 117g (without spacer), 118g (incl. Spacer)
Scope of delivery:
1x CERAMICSPEED bottom bracket PF30 Pressfit | SRAM DUB Road
2x dust seal
4x 1 mm spacers
1x 10 ml CeramicSpeed Allround Grease
The bottom brackets from the Danish company CeramicSpeed represent the absolute high-end solution for all racing drivers who place the highest value on lowest friction with best power transmission. This makes you faster and more effective with the same effort.
The CeramicSpeed-SpeedBalls balls are 15% harder than those of the competition and can absorb significantly more forces. They also have an incredibly smooth surface, thereby reducing rolling resistance to a minimum. With all these improvements, the lifespan could be increased 6 times.
Compared to the already high-quality standard bearings from CeramicSpeed, the "coated" version has a wafer-thin protective layer on the bearing rings. The latter become even tougher, have a further 60% longer life cycle and an even lower rolling resistance.
CeramicSpeed uses only the best material and the latest technologies in its manufacture in order to always achieve the highest possible quality. All products are handmade in Denmark. Manual assembly eliminates manufacturing tolerances and guarantees a 100% fit. So that you really only install the best on your bike.
With this bottom bracket you can install a crank with SRAM DUB shaft in a racing bike frame with PF30 Pressfit bottom bracket shell.
Technical specifications:
intended use : Road, Cyclocross
Bearing shell material: aluminum
Material bearing: ceramic (balls), steel (inner ring and outer ring)
Bottom bracket type: PF30 Pressfit
Bottom bracket housing width: 68 mm
Bottom bracket housing Ø: 46 mm
Crank shaft diameter: 28.99 mm
Compatibility crank: SRAM DUB Road crank
Bearing: stainless steel coated
Tool holder: press-in tool
Color: black or red
Weight according to the manufacturer: not specified
Weight weighed: 117g (without spacer), 118g (incl. Spacer)
Scope of delivery:
1x CERAMICSPEED bottom bracket PF30 Pressfit | SRAM DUB Road
2x dust seal
4x 1 mm spacers
1x 10 ml CeramicSpeed Allround Grease
