Description
CERAMICSPEED bottom bracket EVO386 Pressfit | Shimano Hollowtech II Road
The bottom brackets from the Danish company CeramicSpeed represent the absolute high-end solution for all racing drivers who place the highest value on lowest friction with best power transmission. This makes you faster and more effective with the same effort.
The CeramicSpeed-SpeedBalls balls are 15% harder than those of the competition and can absorb significantly more forces. They also have an incredibly smooth surface, thereby reducing rolling resistance to a minimum. With all these improvements, the lifespan could be increased 6 times.
CeramicSpeed uses only the best material and the latest technologies in its manufacture in order to always achieve the highest possible quality. All products are handmade in Denmark. Manual assembly eliminates manufacturing tolerances and guarantees a 100% fit. So that you really only install the best on your bike.
With this bottom bracket you can install a crank with a 24 mm shaft in a racing bike frame with EVO386 Pressfit bottom bracket shell. This bearing is not compatible with Cervelo P5 frames!
Technical specifications:
intended use : Road, Cyclocross
Bearing shell material: aluminum
Material bearing: ceramic (balls), steel (inner ring and outer ring)
Bottom bracket type: EVO386 Pressfit
Bottom bracket shell width: 86.5 mm
Bottom bracket housing Ø: 46 mm
Crank shaft diameter: 24 mm
Compatibility crank: Shimano Hollowtech II | FSA MegaExo | Race Face X-Type | Rotor Road cranks with 24 mm shaft
Bearings: stainless steel
Tool holder: PressFit tool
Color: black or red
Weight according to the manufacturer: not specified
Weight weighed:
Scope of delivery:
1x CERAMICSPEED bottom bracket EVO386 Pressfit | SRAM DUB Road
2x dust seal
1x 10 ml CeramicSpeed Allround Grease
The bottom brackets from the Danish company CeramicSpeed represent the absolute high-end solution for all racing drivers who place the highest value on lowest friction with best power transmission. This makes you faster and more effective with the same effort.
The CeramicSpeed-SpeedBalls balls are 15% harder than those of the competition and can absorb significantly more forces. They also have an incredibly smooth surface, thereby reducing rolling resistance to a minimum. With all these improvements, the lifespan could be increased 6 times.
CeramicSpeed uses only the best material and the latest technologies in its manufacture in order to always achieve the highest possible quality. All products are handmade in Denmark. Manual assembly eliminates manufacturing tolerances and guarantees a 100% fit. So that you really only install the best on your bike.
With this bottom bracket you can install a crank with a 24 mm shaft in a racing bike frame with EVO386 Pressfit bottom bracket shell. This bearing is not compatible with Cervelo P5 frames!
Technical specifications:
intended use : Road, Cyclocross
Bearing shell material: aluminum
Material bearing: ceramic (balls), steel (inner ring and outer ring)
Bottom bracket type: EVO386 Pressfit
Bottom bracket shell width: 86.5 mm
Bottom bracket housing Ø: 46 mm
Crank shaft diameter: 24 mm
Compatibility crank: Shimano Hollowtech II | FSA MegaExo | Race Face X-Type | Rotor Road cranks with 24 mm shaft
Bearings: stainless steel
Tool holder: PressFit tool
Color: black or red
Weight according to the manufacturer: not specified
Weight weighed:
Scope of delivery:
1x CERAMICSPEED bottom bracket EVO386 Pressfit | SRAM DUB Road
2x dust seal
1x 10 ml CeramicSpeed Allround Grease
