CARBON TI hub rear hub X SL Disc Rear quick release Freewheel Shimano | SRAM
Products from Carbon Ti stand for lightweight without levity and compromises in reliability. Finally, all the parts are moved and tested in the Worldcup. This guarantees the end user a high quality and reliability combined with a first-class appearance.
The X-stroke SL is a significant step toward lightweight construction. Based on the first generation of X-stroke all features were taken and packed in a significantly lighter weight package. The bearing preload is easy customizable and the freewheel engages four latches in a titanium teeth to the commencement of benefit riders to resist. All bearings are of course sealed and installed in a 2 + 2 arrangement.
The lightweight aspect was introduced via an optimized 17 mm aluminum axle and skilfully milled hub body. The axle was butted for optimal results, so that material is only where it is really needed. Simultaneously, the hub body underwent a significant revision. Power accessible recessed disc brake mounts and milled to the Speichenflanschen reduce the weight of the hub at 197g!
The hubs are suitable for quick release or the 12 x 142 mm axle system (Syntace X-12, Shimano E-Thru or Maxle142). Matching conversion kits are available in our shop.
intended use : Road, Cyclocross, Gravel, Cross Country, Marathon, Trail
Material: 7075-T6 aluminum, titanium Grade5
Mounting width: 135 mm
axle type : 5x135 mm quick release
Number of holes: 24, 28 or 32 holes
Disc mount: 6-hole (IS2000)
Freewheel compatibility: 8-, 9-, 10-, 11-speed Shimano | SRAM (Road / MTB)
Recovery type: 4 pawls, 28 grids
bearing : 4x cartridge bearings (1x61903-2RS, 3x61803-2RS)
Sealing: Labyrinth Rubber Seals
Spoke tension: not specified
Color: red, gold, blue, silver, black, green, acid green or silver polished
1x Carbon Ti X-stroke SL Rear hub
1x Spacer for MTB cassette
without quick releases!
quick start Guide
CARBON TI X-stroke SL Rear | EN / IT