CARBON TI Chainring X-CarboCam Oval 4-hole LK 110 asymmetric | Dura Ace R9100 | Ultegra R8000 | Outside
The oval X-CarboCam chainrings of the Italians of CARBON TI are made of an exclusive material mix. The main ingredient is carbon in perfect Italian milling art, with an aluminum (AL7075-T6) and titanium (grade 5 titanium) ring gear for the climbing aids. Thus, the X-CarboCam chainrings are the best example of meaningful material usage, in terms of durability and weight. The back of the carbon chainring is artfully milled to save even the last few grams and to allow a perfect switching behavior. The use of aluminum as tooth material ensures durability. The oval shape smoothes the force peaks during the crank rotation. As a result, you have a more even kick, especially on the mountain, and your muscles are less tired. In addition, lower force peaks reduce the load on the knees.
The chainrings are suitable for 2-speed cranks with asymmetrical 4-hole mount with 110 millimeter bolt circle diameter . With only they belong to the lightest chainrings on the market.
For optimum shifting performance, CARBON TI recommends using the appropriate small chainring. Recommended levels: 52/38 or 50/36. Using other combinations is not recommended.
The pictures show the previous version not suitable for Dura-Ace FC-9100 cranks .
intended use : Road, Triathlon
Material: carbon, aluminum 7075-T6, titanium
bolt circle diameter : 110 mm
Attachment: 4-arm, Shimano asymmetrical
Number of teeth: 50 or 52 teeth
Compatibility cranks : Schimano Dura Ace FC-R9100, FC-9000, Ultegra FC-R8000, FC-6800
Compatibility chain: 10-, 11-, 12-speed
chain line : -
Adjustment options: none
Range (ovalization): not specified
Timing (force introduction): not specified
Finish: 3K carbon, glossy
Weights (manufacturer): 50 teeth - 81g, 52 teeth - 82g
Scope of supply: 1 x CARBON TI X-CarboCam chainring
CARBON TI Chainring X-CarboRing EN | IT