SRAM XX1 new group marks a new era in the mountain range. A front chainwheel and an extremely wide stepped pinion block many bikes of cross counrty be back soon adorn up Allmountain.
Of course, not everyone wants to swim on the same shaft and only drive SRAM components. Something Individuality is. Here the X-monosync chainrings Carbon Ti come into play. They are light, stiff, durable and fit perfectly into the picture of the crank arms. Made possible by the use of titanium and another trick. Carbon Ti integrated chainring and Spider into one. The chainring is mounted directly on the crank arm.
This makes the system more rigid and is also economical with even weight. The chainrings have special teeth that prevent the chain may come off. The principle follows that of SRAM XX1 chainrings with wide and narrow teeth alternately. In conjunction with an SRAM or Shimano Shadow Type2 + derailleur, which have greatly increased bias of the cage, the chain is reliably held in place without chain guide.
intended use : MTB
Material: Titanium Grade 5
Technology: monosync, Narrow Wide
bolt circle diameter : -
Mounting: Direct Mount
Number of teeth: 28, 30, 32, 34 or 36 teeth
Compatibility cranks : Cannondale Hollowgram cranks
Compatibility chain: 9-fold, 10-speed , 11-speed or 12-speed (SRAM Eagle)
chain line : depending on crank used
Adjustment possibilities: none
Colour: titanium nature
Weight: 28Z: 57g, 30Z: 61g 32Z: 65g, 34Z: 72g 36Z: 80g
1x Carbon Ti monosync chainring
1x Hollowgram spacer inside
1x Hollowgram Spacer for Crank