CANE CREEK damper Double Barrel Air
The Double Barrel Air is seen not only as a pure downhill damper, but is predestined thanks to its unique tuning possibilities for the all-mountain and enduro use.
Basically similar to the damper of the spring steel variant Double Barrel. All setting parameters (low / high speed compression, low / high speed rebound, air pressure) can werden.Dies and especially changed separately independently allowing fine tuning of the suspension at any situation and any surface.
The big disadvantage of hard-working air dampers is the overheating and the resulting hardening of the damping. While other manufacturers improved by a plastic insert, heat dissipation, overheating due to design not even occurs when "Double Barrel Air".
This has a twin tube system, ie the oil circulates constantly in a circle and is not pushed as with other manufacturers only back and forth. In this way more heat is released and the damper always maintaining its subtle good response and a constant damping.
Furthermore, there is no Custom Valving more, so the setting of the valves by the manufacturer.
Through the oil circulation system of adjustment is significantly larger than with other manufacturers.
So the damper most exactly the bikers themselves to each wheel and every style can be set and adjusted.
Thus, the "DB-Air" is also perfect for old framework, which can still be thus elicit unexpected performance.
The Valve adjustment with a special key supplied.
Another handy feature provides Cane Creek on his homepage. Who has problems with the diverse possibilities of coordination of the damper, place under http://ww2.canecreek.com/products/suspension/db-air/base-tunes
Tuning tips and specific recommendations in combination with certain frames.
Handmade in Fletcher, United States
intended use: Trail to DH
Installation length x stroke: 190x50mm | 200x50mm | 200x57mm | 215x63mm | 222x63mm | 222x70mm | 240x76mm | 267x90mm
Twin Tube technology (oil circulation through 4 valves)
PTFE lubricating slide friction, durable material Norglide
Independent 4-way adjustment for high and low speed compression and rebound,
Adjusting the spring rate on the air pressure (self-regulating negative air spring)
Air valve position adjustable 360 °
Weight: 512g (200x57mm)
The damper is delivered without mounting sockets, these is sold separately in our shop to buy!