CANE CREEK damper Double Barrel Air CS
The Double Barrel Air CS is seen not only as a pure downhill damper, but is predestined thanks to its unique tuning possibilities for the all-mountain and enduro use.
Basically similar to the damper of the spring steel variant Double Barrel. All setting parameters (low / high speed compression, low / high speed rebound, air pressure, Climb Switch) can be changed separately and mainly independently. This allows fine tuning of the suspension at any situation and any surface.
The big disadvantage of hard-working air dampers is the overheating and the resulting hardening of the damping. While other manufacturers improved by a plastic insert, heat dissipation, overheating occurs not even on the type of construction "Double Barrel Air CS".
This has a twin tube system, ie the oil circulates constantly in a circle and is not pushed as with other manufacturers only back and forth. In this way more heat is released and the damper always maintaining its subtle good response and a constant damping.
Furthermore, there is no Custom Valving more, so the setting of the valves by the manufacturer.
Through the oil circulation system of adjustment is significantly larger than with other manufacturers.
So the damper most exactly the bikers themselves to each wheel and every style can be set and adjusted.
Another new feature is the Climb Switch technology. In Uphill mode the paddles of the wheel is successfully suppressed Lowspeedbereich. This simultaneously increases the traction and the forces of the driver will be doing yet spared. The special feature: The Climb Switch technology uses information from compression and rebound of the damper, which makes this system extremely efficient.
The "DB Air CS" is also perfect for old framework, which can still be thus elicit unexpected performance. The Valve adjustment with a special key supplied.
Another handy feature provides Cane Creek on his homepage. Who has problems with the diverse possibilities of coordination of the damper, place under http://www.canecreek.com/products/suspension/db-air/base-tunes
Tuning tips and specific recommendations in combination with certain frames.
Handmade in Fletcher, United States
Application: Trail to DH
Installation length x stroke: 190x50mm | 200x50mm | 200x57mm | 215x63mm | 222x63mm | 222x70mm | 240x76mm | 267x90mm
Twin Tube technology (oil circulation through 4 valves)
PTFE lubricating slide friction, durable material Norglide
Climb Switch: Uphill mode of Lowspeedbereichs to optimize Pedaliereffizienz
while anti-bobbing technology
Independent 4-way adjustment for high and low speed compression and rebound and Climb Switch Mode,
Adjusting the spring rate on the air pressure (self-regulating negative air spring)
Air valve position adjustable 360 °
Weight: from 509 g (depending on the damper size, manufacturer information)
The damper is delivered without mounting sockets, these is sold separately in our shop to buy!