CAMPAGNOLO Comp One Crank Carbon | Over-Torque ST 53-39 Teeth
CAMPAGNOLO Comp One crank Carbon | Over-Torque ST 53-39 teeth
Campagnolo's philosophy is - constant innovation. The Italian think tank is never satisfied with the status quo, but is always new, higher goals. The technicians at Campagnolo have made every effort to perfect an already exceptional crankset further. The Over-Torque technology represents a significant improvement in performance and at the same time represents an effective weight reduction.
The focus was on Campagnolo on making the distance between the bearings as large as possible, providing the Over-Torque construction place for an extremely wide bearing housing and a shaft with a diameter of 30 mm. The redesigned crankset is by 5% more rigid than the old Super Record and has a better 10% weight-rigidity ratio. This increased rigidity also brings a considerable weight reduction, as well as optimized efficiency of the crankset with it.
XPSS - Extreme Performance Shifting System
Exclusive design of the zones for upshift and downshift of the chain. The special profile of the teeth, 8 pins on the large chainring and the areas to upshift and downshift of the chain allow precise and rapid shifting possible in all conditions. A hard anodization of the chainrings also reduces the wear.
Crank arms: Carbon Shaft: 30 mm, aluminum Chainrings: aluminum anodized, Spider: 5-arm PCD: 135 mm standard Gradation: 53-39 teeth Q-Factor: 145.5 mm Crank: 170 mm, 172.5 mm or 175 mm Finish: black, UD carbon gloss
Delivery: crank including bearings and chainrings without bearing shells! Matching bearing cups are available separately in our shop!
Mounting: Please use the correct mounting of the guidance manufacturer .