shipping country:
    header image

    CAMPAGNOLO Comp One Crank Carbon | Over-Torque CT 50-34 Zähne

    Item no.:

    Product weight:605g
    377,50 € UVP: 489,00 €
    You save 22,8 %, that is 111,50 €
    including 19% VAT. excl. Shipping costs
    • 1-3 days
    Length Crankarm

    Article details

      CAMPAGNOLO Comp One crank Carbon | Over-Torque CT 50-34 teeth

      Campagnolo's philosophy is - constant innovation. The Italian think tank is never satisfied with the status quo, but is always new, higher goals. The technicians at Campagnolo have made every effort to perfect an already exceptional crankset further. The Over-Torque technology represents a significant improvement in performance and at the same time represents an effective weight reduction.


      The focus was on Campagnolo on making the distance between the bearings as large as possible, providing the Over-Torque construction place for an extremely wide bearing housing and a shaft with a diameter of 30 mm. The redesigned crankset is by 5% more rigid than the old Super Record and has a better 10% weight-rigidity ratio. This increased rigidity also brings a considerable weight reduction, as well as optimized efficiency of the crankset with it.

      XPSS - Extreme Performance Shifting System

      Exclusive design of the zones for upshift and downshift of the chain. The special profile of the teeth, 8 pins on the large chainring and the areas to upshift and downshift of the chain allow precise and rapid shifting possible in all conditions. A hard anodization of the chainrings also reduces the wear.

      Technical specifications:

      Crank arms: Carbon
      Shaft: 30 mm, aluminum
      Chainrings: aluminum anodized,
      Spider: 5-arm
      PCD: 110 mm compact
      Gradation: 34-50 teeth
      Q-Factor: 145.5 mm
      Crank: 170 mm, 172.5 mm or 175 mm
      Finish: black, UD carbon gloss

      Weight: 605g

      Delivery: crank including bearings and chainrings without bearing shells!
      Matching bearing cups are available separately in our shop!

      Mounting: Please use the correct mounting of the guidance manufacturer .