BFO BrakeForceOne disc brake BFO M 2-Finger Set
The BFO-M, with its brake booster with the same manual force stronger than any normal brake. An oversized air gap between pad and disc helps avoid grinding the pads and saves the header tank at the lever. However, without having to accept for a wide Hebelweg in purchasing. This was the developers of BrakeForceOne by installing a differential piston in the caliper, which creates a hydraulic transmission. When pressing the brake lever in the 1st phase, the coverings over the extremely large master piston in the brake lever can be done quickly with the brake disc zoom. Once the rest coverings is activated via the back pressure in the brake caliper of the stepped piston. This allows the braking performance with very minimal effort on the lever travel to dose. Although it may sound complicated, in practice this hydraulic principle completely intuitive and the driver can look forward to a ground-free, well-proportional braking with extremely high braking power. The brake bites to such an extent that the brake is perfectly adequate with a finger.
To optically perfectly adjust the brake on your bike, there is the caliper and the transmitter unit in 4 different color variations. In addition, there are several in-house tuning parts of BrakeForceOne to your brake to customize. From brake lever to the brake caliper covers can the BFO-M adapt perfectly color. A special feature is the option to build in transparent lines and combine with color technologies petroleum. Besides the special optics, any air bubbles in the system can immediately identify with these lines.
The built 2015 M version has a magnet in the upper caliper cover which resets the differential piston. Compared to a spring, as it is installed in commercial hydraulic brakes, manages to force the hand are reduced again. This spares especially in long downhills the rider's power reserves and the concentration remains on the trail.
intended use: Cross Country, Marathon, All Mountain
Material lever: aluminum
Material Housing: aluminum
Material caliper: Aluminium
Cable length: 1000 mm front | rear 1700 mm
Brake Oil: Mineral oil
Lever 2-finger lever
Mounting Brake caliper: Postmount (PM)
Colour Brake Calipers | Generator unit: black, red, green or blue
Color lever: black
Color brake pipe: black
Color caliper cover: black (red with black variant)
Weight: 392g (front and rear brakes including pads and clamps)
Delivery includes: front and rear brakes without adapter and brake disc
A detailed user manual you can find here .