BIKE AHEAD COMPOSITES Seatpost THEseatpost-E Carbon 31,6 mm UD-Optik
The Würth-based carbon forge has adopted the ever-present theme of the electrically assisted mountain bike and introduced a complete range of products directly to this end. For THEseries-E, BIKE AHEAD has relied on existing portfolio products and has introduced these adaptations and new interpretations with E-Bike.
THEseatpost-E has been developed by optimization of THEseatpost. The superstructure was optimally optimized and strengthened the higher forces against saddle support and seatpost. The result is a maximum payload, adjusted to the increased driving dynamics as occurs with E-MTBs.
THE seatpost-E not only looks good, it is also perfect for multi-material construction. BIKE AHEAD's high-end seatpost is primarily made of carbon and is distinguished by the detail-loving processing and the innovative NSA technology. The various materials carbon, aluminum, titanium and special NBR rubber are used wherever their properties are required. The rubberized clamping area makes knackenden support clamps the yarn out and reduces the clamping forces of the saddle clamp to a minimum. The clamping plate consists of only one aluminum part, in combination with the carbon rocker, the saddle can be installed and adjusted without frustration.
In order to reduce the clamping forces to a minimum while drastically reducing the notch effect, Bike Ahead Composites has developed the NSA technology (NoSlipApplication). A rubber layer is laminated in the area of ??the clamping. This has not only the advantage that the torques can be reduced to a minimum. Knack and crackling noises are a thing of the past.
100% MADE in GERMANY!
Material: carbon, aluminum, rubber
Material Screws: Titanium
Diameter: 31.6 mm
Length: 350 mm | 400 mm
Offset: 0 mm
minute Insertion: 90 mm | 90 mm
Max. Insertion: 190 mm | 190 mm
possible useful height: 350 mm Variant - 160 to 260 mm
400 mm variant - 210 to 310 mm
(Upper edge of saddle clamp to lower edge saddle rack)
Compatibility Seat braces: round (7x7 mm) and oval (7x10 mm)
Finish: UD carbon - silky gloss
Driver's weight: maximum 115 kg (driver + baggage)
Color logo: 3D-shaped in seat support color
Weight: 169g - 350mm 179g - 400mm (manufacturer's specification)
Scope of delivery: 1x BIKE AHEAD COMPOSITES seatpost