All Mountain Carbon wheelset with independent construction
The wheelset ac-650b all mountain is the further development of the known ac-26 biturbo. Particular attention was paid to low weight and increasing lateral stiffness. The result on the one of the best STW values (ratio stiffness / weight) available at MTB wheelsets this class. One reason for this is the special-spoke design of the wheels.
Instead thin with a variety spokes, the rim is connected by 6 hollow carbon spokes to the hub. This results in a higher rigidity and a simultaneous reduction in weight compared with the usual thin steel spokes, resulting in better acceleration and handling.
In the manufacture of the wheels no high-modulus fibers may be used. Thus, the wheels are resilient and absorb shocks better.
In addition, the rim is not damaged so quickly through the lower brittleness as edges.
The high strength of the carbon fibers, the rim hardly deform, so they do not have to be centered.
The rims and spokes are of the development and manufacture of composites Ahead itself.
The hubs of the wheels are from Acros and promise so that the same high quality of Acros products. There is thus achieved a long service life and very smooth running.
Quote BIKE MAGAZINE 05/13: results of this comparative test: "bike ahead" has the best 29er wheelset with the lowest weight, by far the best acceleration and the highest ever recorded in a 29er wheelset stiffness.
The company Ahead Composites develops and produces in Germany.
Ahead Composites granted up to 3 years crash replacement service for this product.
intended use: All Mountain, Cross Country
Wheel Size: 27.5 inches
Disc mount: 6-hole
Max. Disc size: 205 mm
Front: quick release, 9 mm thru bolt, 15mm thru-axle, 15 x 110 mm Boost thru axle, Predictive Steering RS-1 or Lefty
Rear axle: quick release, 10mm Thru Bolt, 12 x 135 mm thru-axle, 12 x 142 mm thru-axle (X-12, E-Thru, Maxle 142) or 12 x 148 mm thru-axle Boost
Hub color: black
Rim Type: for folding and clincher (clincher), Tubeless Ready
Rim width outside: 28 mm
Rim width inside: 23 mm
Rim height: 30 mm
Freewheel: 8-, 9-, 10-speed Shimano | SRAM compatible, 11-speed SRAM XD (XX1, X01)
Bearing Type: stainless steel bearings or ceramic (optional)
Lateral stiffness: 81 N / mm
Area: 3-K or 12-K carbon fiber, mat or glossy lacquered (optional)
Color: Paint the wheel set in desired color (on request, with supplement)
Weight: 1399g (nude carbon)
Caution: The rims are limited to a total weight (rider and luggage) of 105 kg.
Note: As the hub of Acros are, the supply of spare parts is guaranteed for.
When you use the wheel set with a Cannondale Lefty 2.0 or
Cannondale Lefty fork Supermax, is an optional adapter for the front
Disc brake required!
Paint the wheel set in desired color (on request, with supplement)