AX Lightness stem Rigid 6 carbon UD finish 31.8 mm | 17 °
The next generation of Rigid 6 Carbonvorbauten made by AX Lightness is specially designed for oversized handlebars with 31.8 mm clamping. The larger diameter handlebar requires a larger diameter of the central stem segment and thus a higher stiffness. The ratio of stiffness and weight - Stiffnes to weight - therefore achieved new records in Rigid stem! In the construction value was set on a fiber fairest possible design. Therefore, the fiber strands run through from the clamping of the steerer clamp to the handlebars. This design allows for maximum security of the porch, at the least weight to!
Rigid-6 now has a one-piece handlebar clamping plate instead of two separate clamping bracket, characterized it receives a more graceful appearance even with unchanged weight. At the same time, the torque tolerance increased, so that the handlebar will be even better and safer clamped.
The version with -17 ° angle Eigent suited for 29 "and 27.5" bikes. The cockpit is thus been lowered in order to get the agile handling characteristics of 26er bikes closer. The kink in the middle part of the stem makes sense! Under the stem no additional spacers are required to avoid any contacts with tax rate cap, head tube or fork crown of Lefty.
Material: Body / clamp UD carbon, small parts aluminum, titanium screws
intended use : Road, Cyclocross and Cross Country
Handlebar clamp diameter: 31.8 mm
Clamping steerer: 28.6 mm - 1 1/8 inch
Clamping area height: 43 mm
Clamping range Stem: 40 mm
Length: 90, 100, 110 or 120 mm
Angle: +/- 17 °
Rider weight: max. 100 kg
Max. Torque: 4 Nm (steerer, handlebar)
Finish: UD fabric, satin
Weight: 75 g