ARCHER COMPONENTS D1x Trail e-Shifter | with MFR blips
No matter what has been moving the gears up and down on your cassette - the electronic D1x Trail from Archer Components turns your mechanical rear derailleur into a precise and smooth high-performance circuit!
Installation and adjustment is extremely easy: charge and insert the batteries, attach them to the chainstay and stretch the Bowden cable from the rear derailleur into the D1x Trail. You can then put the switching unit into operation via the app. This is free of charge and offers all the necessary parameters to set. Annoying fumbling is no longer necessary! By completely dispensing with cables, you get a cleaner look on your bike.
Thanks to the Micro Adjust button, the Archer D1x Trail can also be adjusted without a smartphone.
D1x Trail e-Shifter
The system is powered by Li-Ion batteries. These are easily interchangeable and have enough capacity to allow up to 80 hours of driving pleasure. The charge status of your batteries can be checked at any time with the smartphone app or via the LEDs on the components.
The Wireless e-Shifter can be programmed using a smartphone app and is compatible with almost every Shimano, SRAM or TRP 1-speed circuit on the market. It doesn't matter which rear derailleur is to be combined with which cassette. Provided the capacity of your rear derailleur is sufficient to be able to work properly and the chain is tensioned sufficiently. During the first installation, it is determined individually for each gear where your rear derailleur is located after the shifting process. The adjustment is made in 0.25 mm steps. Due to this special feature of the system, it doesn't matter which rear derailleur you want to use with which number of gears. In principle, everything is currently freely programmable from 2 switching stages.
The multi-function remote are buttons that are best attached to the handlebars with handlebar tape or adhesive tape. The blip buttons are connected to the remote control via a 3.5 mm jack cable. The MFR is individually adjustable and offers up to 25 hours of driving time before the battery needs to be charged.
Made in Santa Cruz, California
Area of intended use : MTB, gravel, trekking and touring
Material: plastic, aluminum, steel
Fastening: via clamp (included) or Matchmaker X
Compatibility: All mechanical derailleurs
Connectivity: Bluetooth, ANT+
Waterproof: yes (IP69K)
Weight according to the manufacturer: 239g (D1x Trail e-Shifter)
Weight weighed: 239g (D1x Trail e-Shifter), 42g (MFR Blips)
Scope of delivery: 1x ARCHER COMPONENTS D1x Trail e-Shifter | with MFR blips